Recoverable Errors - Epson TM-L90-i Technical Reference Manual

Recoverable Errors

Printing is no longer possible when recoverable errors occur. They can be recovered easily by
turning the power on again after eliminating the cause of the error.
Error Error description
Roll paper The roll paper cover
cover open was opened during
error * printing.
Autocutter error The autocutter does not
work correctly.
Paper layout Cannot detect the
error label or the black mark.
*: When memory switch 8-8 is set to ON (roll paper cover open while printing: reset possible error)
The error reset command is enabled only when a reset possible error (not including auto
reset errors) occurs.
Chapter 1 Product Overview
Error LED flash code
Approx.
320 ms
Approx. 5120 ms
Approx. 5120 ms
Recovery measure
Close the roll paper
cover, and reset by
executing the error reset
command or turning the
power off and back on
again.
Remove the jammed
paper or foreign matter
in the printer, close the
roll paper cover, and
then turn the power on
to recover.
If the paper is jammed,
clear the jam, close the
roll paper cover, and
then execute the error
reset command or turn
the power off and back
on again.
25
1