Installing the Printer
Although this printer is normally installed and used vertically (with the paper discharged to the
front), it can also be installed and used horizontally (with the paper discharged to the top).
Horizontal position
Do not place the printer in dusty locations.
Do not knock or strike the printer. This may cause defective print.
Do not catch cables or place foreign matter under the printer.
If you install the printer horizontally, affix the control panel labels for horizontal use.
(see
"Control panel label for horizontal use" on page
In addition, if the auto cutter is used to make full cuts with the printer installed horizontally, the
included paper discharge guide must also be installed.
(see
"Installing the paper discharge guide" on page
Vertical position
56)
56)
Chapter 2 Setup
2
55