4.11.12 Programming Midi Stops - Johannus REMBRANDT 275 User Manual

4.11.12 Programming MIDI stops

MIDI is a protocol for communication between the organ and other devices,
such as:
PC
Sequencer
Other musical instruments
With the programmable MIDI stops, you can control any module voice
(1-128) through any MIDI channel (1-16).
1. Press the MENU piston. MIDI Program appears on the display.
2. Press the SET piston. MIDI: appears on the display.
3. Select the MIDI stop to be programmed (for example MIDI Swell
stops). On the display, after MIDI:, there now appears the selected
stop.
4. Use the - and + pistons to select the desired MIDI channel
(Channel:..).
5. Press the SET piston.
6. Use the - and + pistons to select the desired MIDI voice number
(Voice:..).
7. Press the SET piston. The selected adjustments are now stored in
memory.
8. Select another MIDI stop to be programmed, if desired.
9. Press the MENU piston to return to the main menu.
10. Press the MENU piston again to exit the Easy Menu.
27