Stops; Couplers; Accessories - Johannus Studio 260 User Manual

4.6

Stops

Stops are activated via stop switches, pre-programmed memory locations, or
capture memory locations. The stop piston lights when the corresponding stop is
active.The stops are categorized into specific groups:
Pedal: Activates the stops associated with the Pedal.
Choir: Activates the stops associated with the Choir
Great: Activates the stops associated with the Great.
Swell: Activates the stops associated with the Swell.
4.7

Couplers

Manual couplers:
CHOIR - GREAT
Fully couples all keys of the CHOIR to the Great.
SWELL - GREAT:
Fully couples all keys of the Swell to the Great.
SWELL - CHOIR
Fully couples all keys of the Swell to the CHOIR.
Pedal couplers:
CHOIR - PEDAL
Fully couples all keys of the CHOIR to the Pedal.
GREAT - PEDAL:
Fully couples all keys of the Great to the Pedal.
SWELL - PEDAL:
Fully couples all keys of the Swell to the Pedal.
Manual Bass (MB):
Couples the Pedal monophonic to the Great. Only the lowest key that is played on
the Great is coupled from the Pedal to the Great.
If only the lowest key of a chord is released, the pedal key activated by the
Manual Bass function is dropped until a new lowest key is played.
Activate the Manual Bass with the MB piston.
It is advisable not to use the Manual Bass while playing the pedal board to avoid
double bass tones.
4.8

Accessories

Chorus
Chorus is a feature that simulates a slight detuning of the registers that takes
place in a pipe organ. The detuning causes a broader and more lively sound. With
this function, the operation of the wind supply can be set (for more information,
see the menu item "Wind Distribution"
will fluctuate a little, so the sound becomes more lively the more keys and stops
are activated. Chorus can be activated via menu selection, for details see
User Manual Studio 260 / 360 / P-360
:
(Studio 360, P-360 only)
:
(Studio 360, P-360 only)
:
(Studio 360, P-360 only)
(Studio 360, P-360 only)
. When Chorus is active the pitch
§ 5.9.6)
.
.
§ 5.9.4
25