Cisco NCS 1002 System Setup And Software Installation Manual page 56

Install Packages
Thu Aug
Aug 03 11:12:21 Install operation 2 started by root:
install activate pkg ncs1k-k9sec-3.2.0.0-r652
Aug 03 11:12:21 Package list:
Aug 03 11:12:21
Aug 03 11:12:30 Install operation will continue in the background
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply third-party
authority to import, export, distribute or use encryption. Importers,
exporters, distributors and users are responsible for compliance with
U.S. and local country laws. By using this product you agree to comply
with applicable laws and regulations. If you are unable to comply with
U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be
found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
RP/0/RP0/CPU0:Aug
libl2vpn_platform_cap.dll in tree '/pkg/parser/l2vpn_fxs_cmds.parser'
RP/0/RP0/CPU0:ios#
RP/0/RP0/CPU0:ios#
RP/0/RP0/CPU0:ios#Aug 03 11:14:13 Install operation 2 finished successfully
The package configurations are made active on the NCS 1002. As a result, new features and software fixes
take effect. This operation is performed in asynchronous mode. The install activate command runs in the
background, and the EXEC prompt is returned.
Note
If you use the operation ID, all packages that were added in the specified operation are activated together. For
example, if 5 packages are added in operation 8, by executing the install activate id 8 command, all 5 packages
are activated together. You do not have to activate the packages individually.
Step 6 show install active
Example:
RP/0/RP0/CPU0:ios#show install active
Wed Feb 28 03:31:41.617 UTC
Node 0/RP0/CPU0 [RP]
Boot Partition: xr_lv6
Active Packages: 2
System Setup and Software Installation Guide for Cisco NCS 1002
52
3 11:12:20.562 UTC
ncs1k-k9sec-3.2.0.0-r652 show install active
3 11:13:46.120 : nvgen[288]: %MGBL-NVGEN-3-ERR_DLL_UNKNOWN : Unknown DLL
After an RPM of a higher version is activated, and if it is required to activate an RPM of a lower
version, use the force option. For example:
Using the traditional method, add the RPM with lower version to the repository and then force the
activation:
install add source repository ncs1k-xr-6.5.2
install activate ncs1k-xr-6.5.2 force
or
Using the install update command:
install update source repository ncs1k-xr-6.5.2
Perform System Upgrade and Install Feature Packages