Verify Software Version - Cisco NCS 1002 System Setup And Software Installation Manual

Perform Preliminary Checks
Last Event Reason : "HW Event OK"
Platform Information for 0/FT0
PID :
Description :
VID/SN :
HW Oper State :
SW Oper State :
Configuration :
HW Version :
Last Event :
Last Event Reason : "HW Operational"
Platform Information for 0/FT1
PID :
Description :
VID/SN :
HW Oper State :
SW Oper State :
Configuration :
HW Version :
Last Event :
Last Event Reason : "HW Operational"
Platform Information for 0/FT2
PID :
Description :
VID/SN :
HW Oper State :
SW Oper State :
Configuration :
HW Version :
Last Event :
Last Event Reason : "HW Operational"

Verify Software Version

The NCS 1002 is shipped with the Cisco IOS XR software pre-installed. Verify that the latest version of the
software is installed. If a newer version is available, perform a system upgrade. This will install the newer
version of the software and provide the latest feature set on the NCS 1002.
To verify the version of Cisco IOS XR software running on the NCS 1002, perform the following procedure.
Procedure
show version
Displays the software version and details such as system uptime.
Example:
RP/0/RP0/CPU0:ios# show version
Wed Aug
Cisco IOS XR Software, Version 6.5.1
Copyright (c) 2013-2018 by Cisco Systems, Inc.
Build Information:
NCS1K-FTA
"Network Convergence System 1000 Fan"
V01
OPERATIONAL
N/A
"NSHUT RST"
0.1
HW_EVENT_OK
NCS1K-FTA
"Network Convergence System 1000 Fan"
V01
OPERATIONAL
N/A
"NSHUT RST"
0.1
HW_EVENT_OK
NCS1K-FTA
"Network Convergence System 1000 Fan"
V01
OPERATIONAL
N/A
"NSHUT RST"
0.1
HW_EVENT_OK
8 16:10:20.694 IST
System Setup and Software Installation Guide for Cisco NCS 1002

Verify Software Version

23