Application Settings; Event Reception From Other Stations - Mitsubishi Electric RD78G4 User Manual

2.4

Application Settings

Set the event reception from other stations, module operation mode, and other settings for the Motion module.
Item
Supplementary Cyclic Settings
Transient Transmission Group
*2
No. Setting
*1
Parameter Name
*3
Dynamic Routing
Event Reception from Other
Stations
Module Operation Mode
Security
Interlink Transmission Settings
*1 The setting is invalid.
*2 An error will occur when a value other than 0 is set.
*3 An error will occur when the setting is disabled.

Event Reception from Other Stations

Select whether to obtain the history of events occurring in the other stations.
Item
Event Reception from Other Stations
2 PARAMETER SETTINGS
40
2.4 Application Settings
Description
*1
Set the station-based block data assurance and I/O maintenance settings.
Set the transient transmission group No..
Set a name for the module parameter if desired.
Select whether to enable the dynamic routing function.
Select whether to obtain the history of events occurring in the other
stations.
Set the module operation mode of the Motion module.
Set the security measures for access to the Ethernet device.
*1
Set link device ranges when cyclic data are transferred from a station in
the own network to a station in a different network.
Description
Select whether to obtain the history of events occurring in the other stations.
Reference




Page 40 Event Reception from Other Stations
Page 41 Module Operation Mode
Page 41 Security

Setting range
• Enable
• Disable
(Default: Enable)