Table of Contents
Advertisement
Troubleshooting
Weak or no suction / motor suddenly runs louder / motor runs hot.
Possible Causes
Vacuum is not operating
1
Collection tank unit is full
2
Air leak
3
Dirty filter(s)
4
Power unit improperly attached
5
Kink/blockage in hoses/tubes
6
Reduced spray or no spray / Leaking connections.
Possible Causes
Tank siphon tube filter clogged
1
Filling cavity empty
2
Spray tip clogged
3
Tank siphon tube/Solution hose/
4
Wand solution tube kinked/disconnected
Pump is not operating
5
Connections not tight
6
WARNING:
To reduce the risk
of fire, electric
shock or injury
unplug from outlet
before servicing.
Remedies
Check electrical plug
1
Vacuum/switch on?
Call BISSELL Consumer Services (see page 15)
Empty collection tank
2
Check all vacuum connections
3
Secure all latch buttons
See PUTTING IT AWAY, After Dry Vacuuming,
4
Steps 1-2 (see page 12)
Reposition top power unit on tank unit
5
Carrying handle in place to lock tank unit and
top power unit?
Straighten hoses/tubes
6
Check aluminum wands/vacuum flex
hose/solution hose and tube for obstructions
Remedies
See PUTTING IT AWAY Steps 9-11 (see page 12)
1
Refill filling cavity
2
See PUTTING IT AWAY Step 8 (see page 12)
3
Tighten loose connections
4
Relax kinks in solution tubes/hoses
Check electrical plug
5
Pump/spray switch on?
Call BISSELL Consumer Services ( see page 15)
Finger tighten all connections
6
(do not use pliers or other tools)
13
Hide quick links:
Advertisement
Table of Contents
