Bissell 1672 SERIES User Manual page 11

How To Dry Vacuum
Attach one of four dry vacuuming tools.
7.
Insert tank siphon tube in tank unit.
8.
Turn on vacuum/suction switch. Vacuum as usual.
9.
Empty collection tank when it is half full.
10.
See PUTTING IT AWAY, page 12.
11.
How To Wet Vacuum
Getting Ready
Remove dry filter bag from ball cage.
1.
Place ball on raised area on bottom of tank unit.
2.
Position ball cage over ball and press firmly onto
3.
raised area.
Insert tank siphon tube in tank unit.
4.
Attach bare floor tool to floor nozzle.
5.
Cleaning
Turn on vacuum/suction switch. Do not turn on pump/spray switch
1.
or pump damage may occur.
Place Big Green in a dry area of the floor.
2.
Vacuum as usual.
3.
If the machine loses suction and/or motor noise rises in pitch, empty
4.
the tank [see WHEN YOU'RE DONE]. Failure to empty tank will
damage unit.
See WHEN YOU'RE DONE, page 9 and PUTTING IT AWAY, page 12.
5.
Tip:
Always check
motor filter
before dry
vacuuming.
Clean if
necessary.
Vacuum/suction switch
Pump/spray switch
Vacuum/suction switch
Tip:
Clean water
spills can be
picked up from
surfaces direct-
ly. No cleaning
solution is
necessary.
11