Bissell 1672 SERIES User Manual page 6

How To Put It Together Continued
Wand Solution Tube. Connect wand solution tube
10.
to spray tip on floor nozzle and to cap valve on
grip/trigger unit.
Small Wand Clips. Secure tube to wand with two small
11.
wand clips.
Vacuum Flex Hose. Connect vacuum flex hose to
12.
grip/trigger unit and lock with latch buttons. Insert vacuum
flex hose into inlet on top power unit and lock in place.
Hose with Threaded Connectors. Attach hose with
13.
threaded connectors to threaded outlet on grip/trigger
unit. Finger tighten only. Press hose into molded slot
under grip/trigger unit. Attach other end to threaded
outlet on power unit. Finger tighten only.
Vacuum Flex Hose Clips. Hold vacuum flex hose and
14.
hose with threaded connectors together. Snap three
large vacuum flex hose clips in place at three clip bands
on flex hose.
Tank Siphon Tube. Pull up tank siphon tube next to
15.
filling cavity on tank unit. Insert firmly into opening on
power unit.
Assembly is now complete.
Special Attachments For Every Job
See individual sections for proper usage of all accessories
6
Wand Solution Tube
Vacuum Flex Hose
Hose with Threaded Connectors
Cap
Valve
Top Power Unit
Siphon Tube
Make sure the power and
tank units are properly aligned
and locked with the carrying
handle before pulling up
siphon tube assembly and
inserting it into power unit.
For Wet/Deep Cleaning
Bare Floor Attachment
Floor Nozzle Brush
Small Area Cleaning Nozzle
For Dry Vacuuming
Dry Floor Nozzle
Dry Filter Bag
Small Vacuum Nozzle Crevice Attachment
Grip/Trigger
Unit
Dusting Brush