Advertisement
Troubleshooting
Problem
Vacuum
cleaner
has low
suction
Visible dirt
escaping from
cleaner
Reduced
steam or
no steam
Please do
not return
this product
to the store.
14
www.BISSELL.com
Possible causes
Dirt container is full
Dirt container is not installed
properly
Foot is loose
Filters need cleaning
Filters need replacing
Hose tube is not installed properly
Dirt container is full of debris
Filter is missing or installed
incorrectly
Dirt container installed incorrectly
Water tank empty
Steam level not selected
Water filter is not installed properly
Other maintenance or service not included in the manual should be
performed by an authorized service representative.
Thank you for selecting a BISSELL product.
For any questions or concerns, BISSELL is happy to
be of service. Contact us directly at 1-800-237-7691.
WARNING
To reduce the risk of electric shock, turn power switch off
and disconnect polarized plug from electrical outlet before
performing maintenance or troubleshooting checks.
Remedies
Empty dirt container
Position container correctly and
move lock button to the right until
it is in the center of the unit
Make sure foot is fully inserted into
body of unit
Follow filter instructions on page 13
Visit www.bissell.com to order
replacement filters
Follow instructions on page 12
Empty dirt container
Check filter for correct installation
Position container correctly and
move lock button to the right until
it is in the center of the unit
Fill tank
Select steam level by pushing
steam level button
Push the water filter all the way into
the unit until it's flush
Advertisement
