Machine Preparation - Bissell 1620 User Manual

How To Clean Carpets
Plan activities to give carpet time to dry.
1.
Remove furniture from the room (chairs, lamps, coffee
2.
tables, etc.).
Vacuum thoroughly to pick up loose debris and pet hair
3.
before using the PowerLifter Plus.
Plan your cleaning route to leave an exit path. It is best to
4.
begin cleaning in the corner furthest from your exit.
NOTE: You may notice hair and debris deposits on
carpet that were loosened by brushing action,
especially with newer carpets that have never been
deep cleaned before. This debris should be picked
up by hand and thrown away. Debris in the Brush
Belt area should be cleaned out to keep Belts
running free.

Machine Preparation

Use a BISSELL Deep Cleaning Formula in the SmartMix
1.
Bottle. When cleaning carpets, stairs or upholstery, use clean
water in the SmartMix Bottle for gentle cleansing or rinsing.
Choose the SmartMix setting to match the cleaning job.
2.
Set the ReadyTools Dial to either TOOLS/PRETREAT or
3.
FLOOR CLEANING.
PreTreating
Pretreating is recommended to improve cleaning effectiveness
for heavily soiled carpet in high traffic areas such as entryways
and hallways.
Set the SmartMix Dial to HIGH TRAFFIC.
1.
Set the ReadyTools Dial to PRETREAT.
2.
Plug into a proper outlet and turn ON the power switch.
3.
While pressing the trigger, slowly make several passes over
4.
the area to be cleaned. CAUTION: Do not overwet.
Turn the machine Power Switch OFF and let the BISSELL
5.
Deep Cleaning Formula dissolve the tough soil for one to
two minutes before continuing.
3
4
ATTENTION
BERBER CARPET
OWNERS:
Some Berber Carpets have a
tendency to fuzz with wear.
Repeated strokes in the
same area with an ordinary
vacuum or deep cleaner may
aggravate this condition.
Tip:
Try pretreating
stairs or entry
ways with
BISSELL Tough
Stain PreCleaner.
Then deep
clean with the
SmartMix ®
dial set on
High Traffic.
9