Please Do Not Return This Product To The Store - Bissell 1620 User Manual

Troubleshooting continued
PowerLifter Plus is not picking up solution.
Possible Causes
ReadyTools Dial may be at the
1
wrong setting for cleaning job
Nozzle Window may not be
2
properly attached
Tank-in-Tank lid is not
3
properly installed
Tank-in-Tank is not properly seated
4
Tank-in-Tank has picked up the maximum
5
amount of dirty water
Poor tool position
6
(Handheld attachments only.)
Thank you for selecting a BISSELL product.
If you should happen to need assistance during assembly or operation, call: 1-800-237-7691
Please do not return this
BISSELL Consumer Services
For information about repairs or replacement parts, or questions about your warranty, call:
BISSELL Consumer Services
1-800-237-7691
Monday - Friday 8 a.m. — 10 p.m. ET
Saturday 9 a.m. — 8 p.m. ET
Or write:
BISSELL Homecare, Inc.
PO Box 3606
Grand Rapids MI 49501
ATTN: Consumer Services
Or visit the BISSELL website - www.bissell.com
When contacting BISSELL, have model number of unit available.
Please record your Model Number: ___________________
Please record your Purchase Date: ___________________
NOTE: Please keep your original sales receipt. It is your warranty.
Remedies
1
2
3
4
5
6
product to the store.
Set ReadyTools Dial to either FLOOR
CLEANING or TOOLS/PRETREAT.
Make sure the two tabs on the back of
the Floor Nozzle Window are inserted
through the mating slots in the main
housing. Reinstall if necessary.
Reinstall lid; refer to The Basics
section, step 5 on page 7.
Tank-in-Tank must be firmly seated to
function. Remove and reseat Tank-in-Tank.
Empty tank and refill; refer to the
Basics section, page 8.
Readjust angle; apply more downward
pressure.