Operations
Before You Clean Carpets
Plan activities to give carpet time to dry.
1.
Remove easily moved furniture from the room (chairs,
2.
lamps, coffee tables, etc).
Vacuum thoroughly to pick up loose debris and pet hair
3.
before using the OxyPro.
Plan your cleaning route to leave an exit path. It is best
4.
to begin cleaning in the corner farthest from your exit.
Machine Preparation
Set up the machine following instructions in
1.
the Features section on pages 6-9.
Use only BISSELL Advanced Deep Cleaning Formula in the
2.
SmartMix Bottle when cleaning carpets, stairs or upholstery.
Use clean water in the SmartMix Bottle for gentle cleaning
or rinsing.
Choose the SmartMix setting to match the
3.
cleaning job.
Set the ReadyTools switch to either Tools/PreTreat or
4.
Floor Cleaning.
PreTreating (Optional)
PreTreating is recommended to improve cleaning
effectiveness for heavily soiled carpet, high traffic
areas such as hallways and stairs.
Set the SmartMix Dial to High Traffic.
1.
Set ReadyTools Dial to PreTreat.
2.
Plug into a proper outlet and turn the Power Switch ON.
3.
While pressing the trigger, slowly make several passes
4.
over the area to be cleaned.
Caution: Do not overwet.
Turn the machine Power Switch OFF and let BISSELL
5.
Advanced Deep Cleaning Formula dissolve the tough soil
10
for 1-2 minutes before continuing.
ug310-5829_7920K_405.indd 10
ug310-5829_7920K_405.indd 10
WARNING:
To reduce the risk of
injury, be extra careful
when cleaning stairs.
Make sure machine is
secure and level.
5/5/06 11:25:20 AM
5/5/06 11:25:20 AM