Operations
Before You Clean Carpets
Plan activities to give carpet time to dry.
1.
Remove easily moved furniture from the room (chairs,
2.
lamps, coffee tables, etc).
Vacuum thoroughly to pick up loose debris and pet hair
3.
before using the ProHeat.
Plan your cleaning route to leave an exit path. It is best
4.
to begin cleaning in the corner farthest from your exit.
Machine Preparation
Set up the machine following instructions in
1.
The Features section, pages 6-9.
Use Fiber Cleansing Formula in the SmartMix tank when
2.
cleaning carpets, stairs or upholstery. Use clean water in
the SmartMix tank for gentle cleaning, rinsing, or when
applying carpet protectant.
Choose the SmartMix setting to match the
3.
cleaning job.
Set the ReadyTools switch to either Tools/PreTreat or
4.
Floor Cleaning.
PreTreating
Pretreating is recommended to improve cleaning
effectiveness for heavily soiled carpet, high traffic
areas such as entryways and hallways, or stairs.
Set the SmartMix dial to High Traffic.
1.
Set ReadyTools dial to PreTreat.
2.
Plug into a proper outlet and turn ON both the Power
3.
and SmartTemp switches.
While pressing the trigger, slowly make several passes
4.
over the area to be cleaned. Caution: Do not overwet.
Turn the machine Power switches OFF and let BISSELL
5.
Deep Cleaning Formula dissolve the tough soil for 1-2
minutes before continuing.
10
Tip:
Try pre-treating
stairs or entry
ways with
BISSELL Tough
Stain PreCleaner
™
.
Then deep
clean with the
SmartMix
®
dial set on
High Traffic.