Summary Of Parameter Settings; System Parameters - Delta HES Series User Manual

Hybrid energy system
Hide thumbs Also See for HES Series:
Table of Contents

Advertisement

Chapter 4 Parameter Functions

4-1 Summary of Parameter Settings

00 System Parameters

Parameter
Function of the parameter
code
Hybrid
Servo
00-00
model
code ID
Display of rated current of
00-01
the Hybrid Servo Controller
00-02
Reset parameter settings
00-03
Software version
Selection of multi-function
00-04
display
|HES Series
12:230V, 7.5HP
13:460 V, 7.5HP
14:230V, 10HP
15:460V, 10HP
16:230V, 15HP
17:460V, 15HP
18:230V, 20HP
19:460V, 20HP
20:230V, 25HP
Controller
21:460V, 25HP
22:230V, 30HP
23:460V, 30HP
24:230V, 40HP
25:460V, 40HP
26:230V, 50HP
27:460V, 50HP
29:460V, 60HP
31:460V, 75HP
33:460V, 100HP
Display the model specific values
5: Rest the kWh at drive stop
10: Reset parameter values
Read only
0: Display the output current (A)
1: Reserved
2: Display the actual output frequency (H)
3: Display the DC-BUS voltage (U)
4: Display the output voltage (E)
5: Display the output power angle (n)
6: Display the output power in kW (P)
7: Display the actual motor speed rpm (r)
8: Display the estimated output torque (%)
9: Display the PG feedback (G)
10: Reserved
11: Display the signal value of the analog input
terminal PO % (1.)
12: Display the signal value of the analog input
terminal PI % (2.)
13: Display the signal value of the analog input
terminal AUI % (3.)
14: Display temperature of the heat sink in °C (t.)
15: Display temperature of IGBT in °C (T)
16: The status of digital input (ON/OFF) (i)
17: The status of digital output (ON/OFF) (o)
18: Reserved
19: The corresponding CPU pin status of the digital
input (i.)
20: The corresponding CPU pin status of the digital
output (o.)
21~24: Reserved
25: Display the signal value of the analog input
terminal QI % (5.)
26: Display the actual pressure value (Bar) (b.)
27: Display the kWh value (K)
28: Display the motor temperature (currently only
support KTY84) (T.)
the parameter can be set during operation
Settings
4-2
Default
value
Read only
Read only
0
Read only
0

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents