How To Operate The Digital Keypad - Delta HES Series User Manual

Display Message

How to Operate the Digital Keypad

Setting Mode
START
NOTE: In the selection mode, press
Setting parameters
NOTE： In the parameter setting mode, you can press
To shift data
(When operation source is digital keypad)
Setting direction
External Fault.
Display "End" for approximately 1 second if input has been accepted by
pressing key. After a parameter value has been set, the new value is
automatically stored in memory. To modify an entry, use the
keys.
Display "Err", if the input is invalid.
3-3
Chapter 3 Flow of machine Adjustment|HES Series
Descriptions
GO START
to set the parameters.
Success to
set parameter.
to return the selecting mode.
or
Input data error
and