COOLANT TEMP. METER
SENDER INSTALLATION
F150
(1)
(2) Coolant temp.
sender
F200, F225
(2) Coolant press.
sender
(1)
NOTICE
Install the coolant pressure sender on the
port side cylinder. If it is installed on the
top of the starboard side cylinder, the
sender tube could cause a damage by hard
bending.
(1)
(2)
Coolant press.
sender
(2) Coolant press.
(1)
sender
ROUTING THE COOLANT TEMP. LEAD
& COOLANT PRESS. TUBE
F150
Coolant temp. lead
Secure with clamp coolant temp. lead first
F200, F225
Coolant press. tube
5-24
Secure with clamp
Coolant press. tube
Water press. tube
Coolant temp. lead