Specifications and requirements
Trim and tilt system:
Hydro tilt
Propeller mark:
K
Fuel and oil:
Recommended fuel:
Regular unleaded gasoline
Min. research octane number (RON):
90
Fuel tank capacity:
24 L (6.34 US gal, 5.28 Imp.gal)
Recommended engine oil:
YAMALUBE 2-stroke outboard motor
oil
Recommended engine oil:
TC-W3
Gasoline:oil mixing ratio:
50 : 1
Lubrication system:
Pre-mixed fuel and oil
Recommended gear oil:
YAMALUBE outboard gear oil or Hy-
poid gear oil
Recommended gear oil grade:
SAE 90 API GL-4
Gear oil quantity:
0.610 L (0.645 US qt, 0.537 Imp.qt)
Noise and vibration level:
Operator sound pressure level (ICOMIA
39/94):
93.4 dB(A) (E60HMHD)
Vibration on tiller handle (ICOMIA 38/94):
2
3.0 m/s
(E60HMHD)
12
EMU33556
Installation requirements
EMU33566
Boat horsepower rating
EWM01561
Overpowering a boat can cause severe
instability.
Before installing the outboard motor(s), con-
firm that the total horsepower of your out-
board motor(s) does not exceed the boat's
maximum horsepower rating. See the boat's
capacity plate or contact the manufacturer.
EMU40491
Mounting outboard motor
EWM02501
Improper mounting of the outboard mo-
tor could result in hazardous condi-
tions such as poor handling, loss of
control, or fire hazards.
Because the outboard motor is very
heavy, special equipment and training
is required to mount it safely.
Your dealer or other person experienced in
proper rigging should mount the outboard
motor using correct equipment and complete
rigging instructions. For further information,
see page 29.
EMU33582
Remote control requirements
EWM01581
If the engine starts in gear, the boat can
move suddenly and unexpectedly, pos-
sibly causing a collision or throwing
passengers overboard.
If the engine ever starts in gear, the