Yamaha 2CMH Rigging Manual page 10

UNCRATING PROCEDURE
(FOR TYPICAL STEEL FRAME)
7. Remove the top cowling (6).
(6)
8. If the lifting points are covered by the fly-
wheel cover, remove it.
9. Attach a lifting harness (7) securely to the
lifting points (8), and tighten the harness.
(7) (7)
For F350/F300, install the lifting attach-
ment (A) to the flywheel using the exclusive
3 bolts (B), insert the eye bolt (C) to the
attachment, attach a lifting harness (D) to
the eye bolt, and tighten the harness.
[Bolt (B) torque: 36 Nm, 3.6 kgf•m, 27 lb•ft]
(D) (D) (D)
* F350/F300 lifting eye kit (P/N: 90890-06820)
(8) (8)
10. Remove the skeg holder (9) if it is attached.
1-4
(B) (B) (B)
(C) (C) (C)
as special service tool.
Lifting eye kit contents:
Eye bolt (C) Eye bolt (C)
Attachment (A) Attachment (A)
Bolt (B) Bolt (B)
90890-06821 (3 pcs) 90890-06821 (3 pcs)
(A) (A) (A)
(9)
To be continued.