Step 4: Install The Media Holders - Roland SOLJET PRO III XJ-640 Setup Manual

Step 4: Install the Media Holders

Procedure
u
Place the shafts on the stand.
v
Pass the left media holder onto the shafts.
Pass it through from the right edge (as seen from the back of the machine).
w
Move the left media holder to the left end of the shafts and attach the retaining screw.
Retaining screw
Tighten loosely.
L
Pass through the
shaft closest to the
rear of the machine.
3. Assembling and Installing
Engage onto
the shaft at
the front of the
machine.
29