3. Installation
3.1. Mounting
Caution
To prevent manifold components being damaged, apply the recommended tightening torque.
Mount the manifold using the 6 mounting positions on the base with screws.
Required screws are as follows:
①
2 x M5 (End plate: torque = 1.5 Nm)
②
4 x M* (Valve manifold: refer to valve manifold catalogue)
All manifolds are mounted using 6 screws (except VQC4000 which uses 5 screws).
Fig. 3-1 Required screws
- 13 -
No.EX※※-OMW0011-A