[Screen Setup] Custom Settings; [Custom Setup] - Sony DAV-IS10 Operating Instructions Manual

Custom Settings

[CUSTOM SETUP]

Use this to set up playback related and other
settings.
Select [CUSTOM SETUP] in the Setup Display.
For details, see "Using the Setup Display"
(page 86).
The default settings are underlined.
CUSTOM SETUP
HDMI CONTROL:
STB SYNCHRO:
DIGITAL IN:
PAUSE MODE:
TRACK SELECTION:
MULTI-DISC RESUME:
AUDIO DRC:
AUDIO (HDMI):
x [HDMI CONTROL]
Switches the HDMI CONTROL function on or
off. This function is available when you connect
the system and TV with the HDMI cable. For
details, see "Preparing for the HDMI
CONTROL function" (page 41).
[OFF]
Sets the [HDMI CONTROL]
function to off.
[ON] Sets the [HDMI CONTROL]
function to on.
You can operate mutually
between components that are
connected with the HDMI cable.
Note
• When you set to [ON] without the HDMI connection
of the TV, [Please verify the HDMI connection.]
appears and you cannot set to [ON].
x [STB SYNCHRO]
Switches the STB SYNCHRO function on or
off. This function is available when you connect
the system and TV with the HDMI cable and
you set [HDMI CONTROL] to [ON]. For
details, see "Enjoying STB (Set Top Box)
Digital Sound or Digital Satellite Receiver
Sound from the System" (page 46).
[OFF] Sets the [STB SYNCHRO]
function to off.
OFF
OFF
TV OPT, SAT/CABLE COAX
AUTO
OFF
ON
OFF
OFF
[ON] Sets the [STB SYNCHRO]
function to on.
Note
• When this function is set to [ON], [DIGITAL IN]
function setting begins.
x [DIGITAL IN]
Assigns a digital sound input corresponding
with the function "TV" and "SAT/CABLE."
[TV t OPT,
Optical audio input signals are
SAT/CABLE t
assigned to "TV" function,
COAX]
coaxial audio input signals are
assigned to "SAT/CABLE"
function.
[TV t COAX,
Coaxial audio input signals are
SAT/CABLE t
assigned to "TV" function, optical
OPT]
audio input signals are assigned to
"SAT/CABLE" function.
x [PAUSE MODE] (DVD VIDEO/DVD-R/
DVD-RW only)
Selects the picture in pause mode.
[AUTO] The picture, including subjects
that move dynamically, is output
with no jitter. Normally select this
position.
[FRAME]
The picture, including subjects
that do not move dynamically, is
output in high resolution.
x [TRACK SELECTION] (DVD VIDEO only)
Gives the sound track which contains the highest
number of channels priority when you play a
DVD VIDEO on which multiple audio formats
(PCM, DTS, MPEG audio, or Dolby Digital
format) are recorded.
[OFF] No priority given.
[AUTO]
Priority given.
Note
• When you set the item to [AUTO], the language may
change. The [TRACK SELECTION] setting has
higher priority than the [AUDIO] settings in
[LANGUAGE SETUP] (page 87). (Depending on
the disc, this function may not work.)
• If PCM, DTS, Dolby Digital sound, and MPEG audio
tracks have the same number of channels, the system
continued
91
US