Naming Preset Stations - Sony DAV-IS10 Operating Instructions Manual

Naming preset stations

You can enter a name for preset stations. These
names (for example, "XYZ") appear in the front
panel display when a station is selected.
Note that no more than one name can be entered
for each preset station.
1
Press FUNCTION repeatedly until "FM"
or "AM" appears in the front panel
display.
The last received station is tuned in.
2
Press PRESET + or – repeatedly to
select the preset station you want to
create an index name for.
3
Press TUNER MENU.
4
Press X/x repeatedly until "Name In?"
appears in the front panel display.
TUNED
5
Press
6
Create a name by using
Press X/x to select a character, then press c
to move the cursor to the next position.
Letters, numbers, and other symbols can be
input for a radio station name.
If you make a mistake
Press C/c repeatedly until the character to
be changed flashes, then press X/x to select
the desired character.
To erase the character, press C/c
repeatedly until the character to be erased
flashes, then press CLEAR.
7
Press
"Complete!" appears in the front panel
display, and the station name is stored.
8
Press TUNER MENU.
Tip
• You can check the frequency in the front panel
display by pressing DISPLAY repeatedly (page 72).
72
US
STEREO
.
C
/X/x/
.
Viewing the station name or
frequency in the front panel
display
When the system is set to "FM" or "AM," you
can check the frequency using the front panel
display.
Press DISPLAY.
Each time you press DISPLAY, the front panel
display changes as shown.
1 Station name*
2 Frequency**
* This is displayed if you have entered a name for a
preset station.
** Returns to the original display when several seconds
have elapsed.
c
.