Sony DAV-IS10 Operating Instructions Manual page 23

A To connect to a TV with the VIDEO IN jack
Connect the video cord.
.
B To connect to a TV with the COMPONENT VIDEO IN jacks
Connect a component video cord (not supplied). To use the VIDEO OUT (COMPONENT) jacks (Y,
P /C , P /C ) instead of the video jacks, your TV monitor must be equipped with COMPONENT
B B R R
VIDEO IN jacks (Y, P
B
connection and set the output channel of the system to progressive format (this system is compatible
with the 525 progressive format) (page 89).
C To connect to a TV with the HDMI (high-definition multimedia
interface)/DVI (digital visual interface) IN jack
Use a certified HDMI (high-definition multimedia interface) cable (not supplied) to enjoy high quality
digital picture and sound through the HDMI OUT (high-definition multimedia interface out) jack.
HDMI (high-definition multimedia interface)
The system incorporates High-Definition Multimedia Interface (HDMI
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
To connect to a TV with DVI (digital visual interface) input
Use an HDMI (high-definition multimedia interface)-DVI (digital visual interface) converter cord (not
supplied) with an HDMI (high-definition multimedia interface)-DVI (digital visual interface) adaptor
(not supplied). The DVI (digital visual interface) jack will not accept any audio signals. Furthermore,
you cannot connect the HDMI OUT (high-definition multimedia interface out) jack to DVI (digital
visual interface) jacks that are not HDCP (high-bandwidth digital content protection) compliant (e.g.,
DVI (digital visual interface) jacks on PC displays).
/C , P /C ). If your TV accepts progressive format signals, you can use this
B R R
Yellow
Red
Blue
Green
TM
) technology.
continued
23
US