Step 3: Connecting The Tv - Sony DAV-IS10 Operating Instructions Manual

Step 3: Connecting the TV

The following is the basic connection of the control unit and TV. For other TV connections, see
page 22. For other component connections, see page 25.
: Video signal flow
: Audio signal flow
Rear of the control unit
Required cords
A Video cord
.
This connection sends the image to the TV. Connect the VIDEO OUT (VIDEO) jack of the control unit
to the VIDEO IN jack of the TV.
B Audio cord (not supplied)
This connection sends TV sound to the system. You can enjoy TV sound from the speakers with this
connection. Connect the TV (AUDIO IN) jacks of the control unit to the AUDIO OUT jacks of the TV.
Note
• When connecting the jack, insert the plug into the jack as far as it will go.
Example
18
US
B
DMPORT
Incorrect
Correct
AUDIO VIDEO
OUT IN
L
R
A
Yellow
White (L/audio)
Red (R/audio)
TV