Table of Contents
Advertisement
Settings for the HDMI
[HDMI SETUP]
HDMI SETUP
HDMI RESOLUTION:
CONTROL FOR HDMI:
VOLUME LIMIT:
YC
C
/RGB(HDMI):
B
R
AUDIO(HDMI):
JPEG RESOLUTION:
x [HDMI RESOLUTION]
You can select the type of video signal that is
output from the HDMI OUT jack. For details,
see "To select the type of video signal output
from the HDMI OUT jack" (page 36).
The system outputs the
[AUTO(1920×1080p)]
optimal video signal for the
connected TV.
The system outputs
[1920×1080i]
1920 × 1080i* video signals.
The system outputs
[1280×720p]
1280 × 720p* video signals.
The system outputs
[720×480/576p]
720 × 480p* or 720 × 576p*
video signals.
* i: interlace, p: progressive
** Depending on the country model, [720 × 480p] may
appear.
x [CONTROL FOR HDMI]
You can set the [CONTROL FOR HDMI]
function to on/off. This function is available
when you connect the system and TV with an
HDMI cable. For details, see "Using the Control
for HDMI Function for "BRAVIA" Sync"
(page 70).
[OFF]
[ON]
Note
AUTO
(1920x1080p)
• When you set to [ON] without the HDMI connection
OFF
of the TV, [Please verify the HDMI connection.]
LEVEL2
appears and you cannot set to [ON].
YC
C
B
R
OFF
SD
x [VOLUME LIMIT]
If you change the output method of the TV to the
system speaker on the TV menu or by pressing
THEATRE, the System Audio Control
(page 72) is activated and loud sound may be
output depending on the volume level of the
system. You can prevent this by limiting the
maximum level of the volume.
[LEVEL3]
[LEVEL2]
[LEVEL1]
[OFF]
Note
• This function is available only when [CONTROL
FOR HDMI] is set to [ON].
x [YC
You can select the type of HDMI signal output
from HDMI OUT jack.
[YC
[RGB]
Note
• If the playback picture becomes distorted, set
[YC
• If the HDMI OUT jack is connected to a component
with a DVI jack, [RGB] signals will be automatically
output even when you select [YC
Off.
On. You can operate mutually
between components that are
connected with an HDMI cable.
Maximum volume level is set to
15.
Maximum volume level is set to
20.
Maximum volume level is set to
30.
Off.
C
/RGB (HDMI)]
B
R
The system outputs YC
C
]
B
R
signals.
The system outputs RGB signals.
C
] to [RGB].
B
R
C
B
R
C
].
B
R
continued
93
GB
Advertisement
Table of Contents
