Sony 3-299-549-11(1) Operating Instructions Manual page 107

Symptom
Messages do not appear on the TV
screen in the language you want.
The language for the sound track
cannot be changed.
The subtitle language cannot be
changed.
The subtitles cannot be turned off.
The angles cannot be changed.
A disc cannot be ejected and
"LOCKED" appears in the front panel
display.
[Data error] appears on the TV screen
when playing a DATA CD or DATA
DVD.
The system does not work normally.
"DEMO PLAY" appears in the front
panel display.
The Control for HDMI function does
not work.
No sound is output from the system
and TV while using the System Audio
Control function.
Remedy
• In the Setup Display, select the desired language for the on-screen
display in [OSD] under [LANGUAGE SETUP] (page 91).
• Multilingual tracks are not recorded on the DVD being played.
• The DVD prohibits changing the language for the sound track.
• Multilingual subtitles are not recorded on the DVD being played.
• The DVD prohibits changing the subtitles.
• The DVD prohibits turning off subtitles.
• Multi-angles are not recorded on the DVD being played (page 54).
• The DVD prohibits changing the angles.
• Contact your Sony dealer or local authorized Sony service facility.
• The MP3 file/JPEG image file/DivX video file you want to play is
broken.
• Data is not MPEG 1 Audio Layer 3 data.
• The JPEG image file format does not conform to DCF.
• The JPEG image file has the extension ".JPG" or ".JPEG", but is not in
JPEG format.
• The file you want to play has the extension ".AVI" or ".DIVX" but is not
in DivX format, or is in DivX format but does not conform to a DivX
Certified profiles.
• Disconnect the AC power cord (mains lead) from the wall outlet (mains),
then reconnect after several minutes.
• Contact your Sony dealer or local authorized Sony service facility.
• When "HDMI" does not light up in the front panel display, check the
HDMI connection (page 27).
• Set the [CONTROL FOR HDMI] setting in [HDMI SETUP] to [ON]
(pages 71, 93).
• Make sure that the connected component is compatible with the Control
for HDMI function.
• Check that the AC power cord (mains lead) of the connected component
is connected securely.
• Check the connected component's setting for the Control for HDMI
function. Refer to the operating instructions supplied with the
component.
• If you change the HDMI connection, connect and disconnect the AC
power cord (mains lead), or have a power failure, set the [CONTROL
FOR HDMI] setting in [HDMI SETUP] to [OFF], then set the
[CONTROL FOR HDMI] setting in [HDMI SETUP] to [ON] (page 93).
• For details, see "Using the Control for HDMI Function for "BRAVIA"
Sync" (page 70).
• Set the [AUDIO (HDMI)] setting in [HDMI SETUP] to [ON] (page 94).
• Make sure that the connected TV is compatible with the System Audio
Control function.
• For details, see "Using the Control for HDMI Function for "BRAVIA"
Sync" (page 70).
• Check the connections.
continued
107
GB