Specifications; Maximum Ratings - Motorola NXP SYMPHONY DSP56007 Technical Data Manual

Freescale Semiconductor, Inc.
INTRODUCTION
The DSP56007 is fabricated in high density CMOS with Transistor-Transistor Logic
(TTL) compatible inputs and outputs.

MAXIMUM RATINGS

This device contains circuitry protecting
against damage due to high static voltage or
electrical fields; however, normal precautions
should be taken to avoid exceeding maximum
voltage ratings. Reliability is enhanced if
unused inputs are tied to an appropriate logic
voltage level (e.g., either GND or V
Note: In the calculation of timing requirements, adding a maximum value of one
specification to a minimum value of another specification does not yield a
reasonable sum. A maximum specification is calculated using a worst case
variation of process parameter values in one direction. The minimum
specification is calculated using the worst case for the same parameters in the
opposite direction. Therefore, a "maximum" value for a specification will
never occur in the same device that has a "minimum" value for another
specification; adding a maximum to a minimum represents a condition that
can never exist.
MOTOROLA
SECTION

SPECIFICATIONS

CAUTION
DSP56007/D
For More Information On This Product,
Go to: www.freescale.com
2
).
CC
2-1