Db2; Aix And Linux Systems - IBM Power Systems 775 Manual

dbname=<database_name>
dbloc=<database_path>
Designations: cfgloc: xCAT configuration type, user authorized to change it, and its
password
Attributes:
– <X.Y.Z>: Version of xCAT
– <built>: SVN build number
– <date>: Build date
– <xcat_user>: Configuration user
– <xcat_password>: Configuration user password
– <database_instance>: Database instance name
– <database_name>: Database name
– <database_path>: Database path
Example 3-64 Listing the xCAT database configuration
# lsxcatd -a
Version 2.6.8 (svn r10523, built Wed Sep 14 09:06:44 EDT 2011)
cfgloc=DB2:xcatdb|xcatdb
dbengine=DB2
dbinstance=xcatdb
dbname=xcatdb
dbloc=/db2database/db2

3.5.4 DB2

There is no specific configuration for the IBM Power Systems 775 cluster that requires
monitoring attention. However, if such monitoring is required, there is more documentation for
DB2 settings as shown in Table 3-1 on page 158.

3.5.5 AIX and Linux systems

Table 3-10 lists the configuration details for specific areas that are related to the IBM Power
System 775 clusters, such as devices, pci cards, scsi cards, or logical device driver
configurations. For more information, see Table 3-1 on page 158.
Table 3-10 AIX and Linux system configuration commands equivalencies
AIX
lsdev
-
-
lscfg
Important: Although some commands feature the same syntax and purpose, their internal
arguments and flags might differ for AIX and Linux.
238
IBM Power Systems 775 for AIX and Linux HPC Solution
Linux Command Description
- Lists device status information.
lspci Lists information about PCI device locations.
lsscsi Lists information about detected SCSI devices.
lscfg Lists hardware configuration.