Loadleveler - IBM Power Systems 775 Manual

Component
Diskless resource
(Network File System)
Diskless resource (Trivial
File Transfer Protocol)
TEAL

3.1.1 LoadLeveler

In this section, we describe commonly used LoadLeveler commands. For more information,
see Table 3-1 on page 158.
The following commands are described:
llq
llstatus
llq
For this command, we list the help description, as shown in Figure 3-1. Typical output
examples are shown in Example 2-15 on page 146, and Example 2-16 on page 147.
# llq -?
Usage: llq [ -? ] [ -H ] [ -v ] [ -W ] [ -x [ -d ] ] [ -s ] [ -p ] [ -l ] [ -m
] [ -w ] [ -X {cluster_list | all} ] [ -j joblist | joblist ] [ -u userlist ] [
-h hostlist ] [ -c classlist ] [ -R reservationlist ] [ -f category_list ] [ -r
category_list ] [ -b ] [ -S <total | user | group | class> ]
Figure 3-1 llq command flag description
The llq command queries information about jobs in LoadLeveler queues. For more
information about the command reference details, see "Tivoli Workload Scheduler
LoadLeveler: Command and API Reference" in Table 3-1 on page 158.
llstatus
For this command, we list the help description as shown in Figure 3-2 on page 165. Typical
output examples are shown in Example 2-18 on page 151, Example 2-18 on page 151, and
Example 2-19 on page 152.
164
IBM Power Systems 775 for AIX and Linux HPC Solution
Command (AIX/Linux)
service nfs status
lssrc -g nfs
showmount -e
service tftpd status
lssrc -s tftpd
For more information, see Table 3-6 on page 219.
Description
Reports the status of the Network File System
(NFS) daemons (Linux only).
Reports the status of the NFS daemons (AIX
only).
Lists the exported mount points and their
access permissions.
Reports the status of the Trivial File Transfer
Protocol (TFTP) daemon (Linux only).
Reports the status of the TFTP daemon (AIX
only).