How To Set The Cpu For The Reaction Of The Input/Output Modules To Channel Faults - Siemens Simatic PCS 7 Function Manual

Result
The following figure shows an example of a configuration in HW Config: Connection to a high
availability plant bus is possible.
Additional information
● Manual
5.2.5

How to set the CPU for the reaction of the input/output modules to channel faults

Introduction
Only perform the following procedure when the libraries "Redundant IO (V3.0)" or "Redundant
IO (V4.0)" are used.
High Availability Process Control Systems (V9.0)
Function Manual, 05/2017, A5E39221836-AA
Automation System S7-400H; High Availability Systems
Advantages of high availability components
5.2 SIMATIC H station
113