Identification; Application; Setting Guidelines; Single Point Generic Control 8 Signals Spc8Gapc - ABB Relion REC670 Applications Manual

1MRK 511 358-UEN A
13.8.1

Identification

Function description
Generic communication function for
Double Point indication
13.8.2

Application

Generic communication function for Double Point indication (DPGAPC) function block is used
to send double point position indication to other systems, equipment or functions in the
substation through IEC 61850-8-1 or other communication protocols. It is especially intended
to be used in the interlocking station-wide logics. To be able to get the signals into other
systems, equipment or functions, one must use other tools, described in the Engineering
manual, and define which function block in which systems, equipment or functions should
receive this information.
More specifically, DPGAPC function reports a combined double point position indication
output POSITION, by evaluating the value and the timestamp attributes of the inputs OPEN
and CLOSE, together with the logical input signal VALID.
When the input signal VALID is active, the values of the OPEN and CLOSE inputs determine the
two-bit integer value of the output POSITION. The timestamp of the output POSITION will have
the latest updated timestamp of the inputs OPEN and CLOSE.
When the input signal VALID is inactive, DPGAPC function forces the position to intermediated
state.
When the value of the input signal VALID changes, the timestamp of the output POSITION will
be updated as the time when DPGAPC function detects the change.
Refer to Table
the quality attributes.
Table 37:
VALID
0
13.8.3

Setting guidelines

The function does not have any parameters available in the local HMI or PCM600.
13.9

Single point generic control 8 signals SPC8GAPC

Application manual
37 for the description of the input-output relationship in terms of the value and
Description of the input-output relationship
OPEN
-
1 0
1 1
1 0
1 1
IEC 61850 IEC 60617
identification identification
DPGAPC -
CLOSE
-
0
0
1
1
GUID-E16EA78F-6DF9-4B37-A92D-5C09827E2297 v3
ANSI/IEEE C37.2
device number
-
POSITION
Value Description
0 Intermediate
0 Intermediate
1 Open
2 Closed
3 Bad State
Section 13
Control
SEMOD55391-5 v8
SEMOD55398-5 v4
SEMOD176448-1 v3
335