ABB Relion 670 Series Communication Protocol Manual
  1. Manuals
  2. Brands
  3. ABB Manuals
  4. Power distribution unit
  5. Relion 670 series
  6. Communication protocol manual

ABB Relion 670 Series Communication Protocol Manual

Hide thumbs Also See for Relion 670 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
®
Relion
670 SERIES
SPA, 670 series
Version 2.2
Communication protocol manual

Advertisement

Table of Contents
loading

Related Manuals for ABB Relion 670 Series

Summary of Contents for ABB Relion 670 Series

  • Page 1 ® Relion 670 SERIES SPA, 670 series Version 2.2 Communication protocol manual...
  • Page 3 Document ID: 1MRK 511 396-UEN Issued: May 2019 Revision: E Product version: 2.2 © Copyright 2017 ABB. All rights reserved...
  • Page 4 Copyright This document and parts thereof must not be reproduced or copied without written permission from ABB, and the contents thereof must not be imparted to a third party, nor used for any unauthorized purpose. The software and hardware described in this document is furnished under a license and may be used or disclosed only in accordance with the terms of such license.
  • Page 5 This document has been carefully checked by ABB but deviations cannot be completely ruled out. In case any errors are detected, the reader is kindly requested to notify the manufacturer.
  • Page 6 (Low-voltage directive 2006/95/EC). This conformity is the result of tests conducted by ABB in accordance with the product standard EN 60255-26 for the EMC directive, and with the product standards EN 60255-1 and EN 60255-27 for the low voltage directive. The...

  • Page 7: Table Of Contents

    Verifying the communication....................23 6.1.2.1 Verifying SPA communication....................23 6.1.3 Fiber optic loop..........................24 6.1.4 Optical budget calculation for serial communication with SPA/IEC ....... 24 Section 7 SPA functions....................25 SPA, 670 series Communication protocol manual © Copyright 2017 ABB. All rights reserved...
  • Page 8 7.2.3 Logical signal status report BINSTATREP...................30 7.3.1 Identification..........................30 7.3.2 Functionality..........................30 7.3.3 Function block..........................30 7.3.4 Signals............................31 7.3.5 Settings............................32 7.3.6 Operation principle........................32 Section 8 Glossary......................33 Glossary..............................33 SPA, 670 series Communication protocol manual © Copyright 2017 ABB. All rights reserved...

  • Page 9: Introduction

    Operation manual Application manual Technical manual Communication protocol manual Cyber security deployment guideline IEC07000220-4-en.vsd IEC07000220 V4 EN-US Figure 1: The intended use of manuals throughout the product lifecycle SPA, 670 series Communication protocol manual © Copyright 2017 ABB. All rights reserved...

  • Page 10: Document Revision History

    Functions CHMMHAI, VHMMHAI, DELVSPVC, DELISPVC and DELSPVC added. Updates/ enhancements made to ZMFPDIS, ZMFCPDIS, CCRBRF, REALCOMP, PTRSTHR and FNKEYMDx. Ordering section updated. 2019-05 2.2.3 PTP enhancements and corrections SPA, 670 series Communication protocol manual © Copyright 2017 ABB. All rights reserved...

  • Page 11: Related Documents

    Document numbers Application manual 1MRK 506 369-UEN Commissioning manual 1MRK 506 371-UEN Product guide 1MRK 506 372-BEN Technical manual 1MRK 506 370-UEN Type test certificate 1MRK 506 372-TEN SPA, 670 series Communication protocol manual © Copyright 2017 ABB. All rights reserved...

  • Page 12: Document Symbols And Conventions

    It might indicate the presence of a hazard which could result in corruption of software or damage to equipment or property. The information icon alerts the reader of important facts and conditions. SPA, 670 series Communication protocol manual © Copyright 2017 ABB. All rights reserved...

  • Page 13: Document Conventions

    • Dimensions are provided both in inches and millimeters. If it is not specifically mentioned then the dimension is in millimeters. SPA, 670 series Communication protocol manual © Copyright 2017 ABB. All rights reserved...

  • Page 15: Spa Application

    SPA-bus codes and for translation of the data that should be sent to the IED. For the specification of the SPA protocol V2.5, refer to SPA-bus Communication Protocol V2.5. SPA, 670 series Communication protocol manual © Copyright 2017 ABB. All rights reserved...

  • Page 16: Setting Guidelines

    The IED does not adapt its speed to the actual communication conditions because the communication speed is set on the local HMI. SPA, 670 series Communication protocol manual © Copyright 2017 ABB. All rights reserved...

  • Page 17: Spa Operation Principle

    PCFCNT:8 6-O-2830 6-O-2829 PCFCNT:9 6-O-2836 6-O-2835 PCFCNT:10 6-O-2842 6-O-2841 PCFCNT:11 6-O-2848 6-O-2847 PCFCNT:12 6-O-2854 6-O-2853 PCFCNT:13 6-O-2860 6-O-2859 PCFCNT:14 6-O-2866 6-O-2865 PCFCNT:15 6-O-2872 6-O-2871 PCFCNT:16 6-O-2878 6-O-2877 SPA, 670 series Communication protocol manual © Copyright 2017 ABB. All rights reserved...

  • Page 18: I/O Modules

    5-O-525 SINGLECMD1-Cmd16 4-S-4654 5-O-526 SINGLECMD2-Cmd1 4-S-4672 5-O-527 SINGLECMD2-Cmd2 4-S-4673 5-O-528 SINGLECMD2-Cmdt3 4-S-4674 5-O-529 SINGLECMD2-Cmd4 4-S-4675 5-O-530 SINGLECMD2-Cmd5 4-S-4676 5-O-531 SINGLECMD2-Cmd6 4-S-4677 5-O-532 Table continues on next page SPA, 670 series Communication protocol manual © Copyright 2017 ABB. All rights reserved...
  • Page 19 SINGLECMD4-Cmd8 4-S-4745 5-O-566 SINGLECMD4-Cmd9 4-S-4746 5-O-567 SINGLECMD4-Cmd10 4-S-4747 5-O-568 SINGLECMD4-Cmd11 4-S-4748 5-O-569 SINGLECMD4-Cmd12 4-S-4749 5-O-570 SINGLECMD4-Cmd13 4-S-4750 5-O-571 SINGLECMD4-Cmd14 4-S-4751 5-O-572 SINGLECMD4-Cmd15 4-S-4752 5-O-573 SINGLECMD4-Cmd16 4-S-4753 5-O-574 SPA, 670 series Communication protocol manual © Copyright 2017 ABB. All rights reserved...

  • Page 20: Event Function Event

    Two special signals for event registration purposes are available in the IED: Terminal Restarted (0E50) and Event buffer overflow (0E51). The status and event codes for the EVENT function are found in Table 3. SPA, 670 series Communication protocol manual © Copyright 2017 ABB. All rights reserved...

  • Page 21: Connection Of Signals As Events

    ^INPUT6 3I0RANG ^INPUT7 3U0RANG FALSE ^INPUT8 ^INPUT9 ^INPUT10 ^INPUT11 ^INPUT12 ^INPUT13 ^INPUT14 ^INPUT15 ^INPUT16 IEC07000065-2-en.vsd IEC07000065 V2 EN-US Figure 4: Connection of protection signals for event handling SPA, 670 series Communication protocol manual © Copyright 2017 ABB. All rights reserved...

  • Page 22: Communication Ports

    Using the rear SPA port for either local or remote communication with a PC requires the following equipment: • Optical fibers • Opto/electrical converter for the PC • SPA, 670 series Communication protocol manual © Copyright 2017 ABB. All rights reserved...
  • Page 23 When communicating between the local HMI and a PC, the only hardware required is a front- connection cable. SPA can be accessed via LHMI front only when using the Field Service Tool Access (FSTACCS). SPA, 670 series Communication protocol manual © Copyright 2017 ABB. All rights reserved...

  • Page 25: Spa Settings

    19200 Bd 38400 Bd PID-6194-SETTINGS v5 Table 5: LONSPA Non group settings (basic) Name Values (Range) Unit Step Default Description Operation Operation SlaveAddress 1 - 899 Slave address SPA, 670 series Communication protocol manual © Copyright 2017 ABB. All rights reserved...

  • Page 27: Spa Technical Data

    IP14404-1 v1 M11901-1 v2 Table 6: SPA communication protocol Function Value Protocol Communication speed 300, 1200, 2400, 4800, 9600, 19200 or 38400 Bd Slave number 1 to 899 SPA, 670 series Communication protocol manual © Copyright 2017 ABB. All rights reserved...

  • Page 29: Establishing Connection And Verifying The Spa/Iec Communication

    To verify that the rear communication with the SMS/SCS system is working, there are some different methods. Choose one of the following. 6.1.2.1 Verifying SPA communication M11735-81 v5 Procedure SPA, 670 series Communication protocol manual © Copyright 2017 ABB. All rights reserved...

  • Page 30: Fiber Optic Loop

    Losses in connection box, two contacts (1 dB/ 2 dB contact) Margin for 2 repair splices (0.5 dB/splice) 1 dB Maximum total attenuation 11 dB 7 dB SPA, 670 series Communication protocol manual © Copyright 2017 ABB. All rights reserved...

  • Page 31: Spa Functions

    EVENT Input signals Name Type Default Description BLOCK BOOLEAN Block of function INPUT1 GROUP Input 1 SIGNAL INPUT2 GROUP Input 2 SIGNAL Table continues on next page SPA, 670 series Communication protocol manual © Copyright 2017 ABB. All rights reserved...

  • Page 32: Settings

    AutoDetect Reporting criteria for input 1 OnSet OnReset OnChange AutoDetect EventMask2 NoEvents AutoDetect Reporting criteria for input 2 OnSet OnReset OnChange AutoDetect Table continues on next page SPA, 670 series Communication protocol manual © Copyright 2017 ABB. All rights reserved...
  • Page 33 AutoDetect Reporting criteria for input 13 OnSet OnReset OnChange AutoDetect EventMask14 NoEvents AutoDetect Reporting criteria for input 14 OnSet OnReset OnChange AutoDetect Table continues on next page SPA, 670 series Communication protocol manual © Copyright 2017 ABB. All rights reserved...

  • Page 34: Operation Principle

    The outputs from the EVENT function are formed by the reading of status, events and alarms by the station level on every single input. The user-defined name for each input is intended to be used by the station level. SPA, 670 series Communication protocol manual © Copyright 2017 ABB. All rights reserved...

  • Page 35: Setting Guidelines

    LONChannelMask or SPAChannelMask 7.2.2 M12811-15 v2 Definition of which part of the event function block that shall generate events: SPA, 670 series Communication protocol manual © Copyright 2017 ABB. All rights reserved...

  • Page 36: Minrepintval (1 - 16)

    OUTPUT8 ^INPUT8 OUTPUT9 ^INPUT9 OUTPUT10 ^INPUT10 OUTPUT11 ^INPUT11 OUTPUT12 ^INPUT12 OUTPUT13 ^INPUT13 OUTPUT14 ^INPUT14 OUTPUT15 ^INPUT15 OUTPUT16 ^INPUT16 IEC09000730-1-en.vsd IEC09000730 V1 EN-US Figure 7: BINSTATREP function block SPA, 670 series Communication protocol manual © Copyright 2017 ABB. All rights reserved...

  • Page 37: Signals

    BOOLEAN Logical status report output 13 OUTPUT14 BOOLEAN Logical status report output 14 OUTPUT15 BOOLEAN Logical status report output 15 OUTPUT16 BOOLEAN Logical status report output 16 SPA, 670 series Communication protocol manual © Copyright 2017 ABB. All rights reserved...

  • Page 38: Settings

    INPUTn OUTPUTn IEC09000732-1-en.vsd IEC09000732 V1 EN-US Figure 8: BINSTATREP logical diagram SPA, 670 series Communication protocol manual © Copyright 2017 ABB. All rights reserved...

  • Page 39: Glossary

    United Nations-sponsored standards body within the International Telecommunications Union. CAN carrier module CCVT Capacitive Coupled Voltage Transformer Class C Protection Current Transformer class as per IEEE/ ANSI CMPPS Combined megapulses per second SPA, 670 series Communication protocol manual © Copyright 2017 ABB. All rights reserved...
  • Page 40 Dynamic random access memory Disturbance report handler Digital signal processor Direct transfer trip scheme Ethernet configuration tool EHV network Extra high voltage network Electronic Industries Association Electromagnetic compatibility SPA, 670 series Communication protocol manual © Copyright 2017 ABB. All rights reserved...
  • Page 41 IEC 60870-5-103 Communication standard for protection equipment. A serial master/ slave protocol for point-to-point communication IEC 61850 Substation automation communication standard SPA, 670 series Communication protocol manual © Copyright 2017 ABB. All rights reserved...
  • Page 42 Line data communication module Local detection device Light-emitting diode LON network tool Local operating network Miniature circuit breaker Mezzanine carrier module Milli-ampere module Main processing module MVAL Value of measurement SPA, 670 series Communication protocol manual © Copyright 2017 ABB. All rights reserved...
  • Page 43 A balanced serial interface for the transmission of digital data in point- to-point connections RS485 Serial link according to EIA standard RS485 Real-time clock Remote terminal unit Substation Automation Select-before-operate SPA, 670 series Communication protocol manual © Copyright 2017 ABB. All rights reserved...
  • Page 44 Transmit (disturbance data) TNC connector Threaded Neill-Concelman, a threaded constant impedance version of a BNC connector Trip (recorded fault) TPZ, TPY, TPX, TPS Current transformer class according to IEC SPA, 670 series Communication protocol manual © Copyright 2017 ABB. All rights reserved...
  • Page 45 Three times zero-sequence current.Often referred to as the residual or the earth-fault current Three times the zero sequence voltage. Often referred to as the residual voltage or the neutral point voltage SPA, 670 series Communication protocol manual © Copyright 2017 ABB. All rights reserved...
  • Page 48 ABB AB Grid Automation Products SE-721 59 Västerås, Sweden Phone +46 (0) 21 32 50 00 Scan this QR code to visit our website www.abb.com/protection-control © Copyright 2017 ABB. All rights reserved.

This manual is also suitable for:

Relion reb670Relion rec670Relion red670Relion reg670Relion rel670Relion ret670 ... Show all

Table of Contents