Introduction; Ce Marking; System Design And Planning - Honeywell Notifier ID3000 Series Installation & Commissioning Manual

XLS80e Fire Alarm Control Panels
1

Introduction

The purpose of this manual is to provide the user with all
recommended procedure descriptions and full technical
details for the successful installation and commissioning
of HONEYWELL's XLS80e Series stand-alone fire alarm
controllers and repeaters, or for a complete XLS80e Series
integrated Fire Control System.
Procedures described in this manual include appropriate
warnings and cautions to guide the user towards adopting
safe and methodical work practices during the installation
and commissioning phases.

1.1 CE Marking

CE
This panel is CE Marked to show that it conforms to the
requirements of the following European Community
Directives:
The EMC Directive 2004/108/EEC, by the application of
the following EMC Standards:
EN 61000-6-3: Electromagnetic Compatibility (EMC)
Generic emission standard for Residential, Commercial
and Light industrial environments
EN 50130-4: EMC Product family standard: Immunity
requirements for components of fire, intruder and social
alarm systems.
Low Voltage Directive 2006/95/EC, by the application of
the safety standard:.
EN 60950-1: Safety of information technology
equipment.
The Constructive Products Directive 89/1-6/EC, by the
application of the following standards:
EN 54-2: Fire detection and fire alarm systems - Control
and indicating equipment.
EN 54-4: Fire detection and fire alarm systems - Power
supply equipment.

1.2 System Design and Planning

It is assumed that the system, of which the XLS80e Series
fire control equipment is a part, has been designed by a
competent fire alarm system designer in accordance with
the requirements of EN54 Part 14 and any other local codes
of practice that are applicable.
The design drawings should clearly show the positions of
all the XLS80e Series control equipment and field devices.
1 Honeywell, Issue 7
September 2009