Table of Contents
Advertisement
Only fit the electronics
modules after all the other
trades have completed
their tasks!
Honeywell, Issue 7
September 2009
XLS80e Fire Alarm Control Panels
1.3 Personnel
Installation of this product must be carried out only by
suitably-qualified electrical engineers.
1.4 General
The XLS80e Series of intelligent fire alarm controllers are
designed for use with HONEYWELL's range of addressable
analogue sensors, control and monitoring modules and
addressable call points.
The XLS80e Series control panel design complies with the
requirements of EN54 Part 2 and Part 4.
The design of the XLS80e Series fire control panels is based
on a modular build concept which offers the user completely
flexible system solutions. Each control panel comprises a
number of separate build modules to simplify the installation
process. The electronic components are contained in an
easy-to-fit module called the main chassis.
The control panel can be used with either an internal or
external Power Supply Unit (PSU).
Each control panel has space provision for two sealed,
lead-acid batteries.
The panel has a built-in Master/Slave network serial
communications interface which operates under RS485
protocol. Alternatively, the panel can be connected to an
XLSnet fault-tolerant peer-to-peer network.
While every effort is made to ensure the accuracy of the
content of this manual, the manufacturer reserves the right
to change the information without notice.
Installation
The XLS80e Series modules are easy to install providing
the recommended procedures described in this manual
are followed. To avoid inadvertant contamination of the main
chassis (comprising the PCBs) and of the PSU (if mounted
internally), the manufacturer recommends that these items
are installed in the back box only after all other trades
have completed their tasks.
1.5 Date-dependent Functions
It should be noted that the calendar end date for this
product is 31/12/2099 (two thousand and ninety nine) and
it will perform correctly up to this date.
The calendar function has not been tested beyond this
date.
2
Hide quick links:
Advertisement
Table of Contents
