Kurzweil X-Pro Series Getting Started Manual page 36

Setup Mode
Adjusting The Volume And Pan Of Zones
3.
4.
Next, let's adjust the Pan (left/right speaker position) of zone 2:
5.
Use the same methods to adjust volume and pan for any zone. See The Setup Editor above for
details on saving these changes when you exit the Setup Editor.
4-10
On the PAN-VOL page, use the Chan/Layer buttons to the left of the display to select zone 2. You
can view the number of the selected zone in the top right corner of screen (see below.)
Use the cursor to select the EntryVolume parameter. The volume for this zone is already at its
maximum value 127. Let's use the alpha wheel to turn this parameter down to 90 (see below.) Now
the zone will play the piano program 8 Grand "Evans" at a lower volume than zone 1.
On the PAN-VOL page of zone 2, use the cursor to select the EntryPan parameter. Use the alpha
wheel to turn this parameter to 127 (see below.) Now the zone will play the piano program from
only the right speaker. (For the EntryPan parameter, a value of 64 plays the program at equal
volume from left and right speakers. A value of 0 plays the program from only the left speaker, and
a value of 127 plays the program from only the right speaker. Values in between make the sound
appear to come from a position between the left and right speakers.)