Adjust The Volume Balance - Roland MUSIC ATELIER Series Owner's Manual

Adjust the Volume Balance

The ATELIER allows you to adjust the volume balance individually for each Part.
The following buttons are used to adjust the volume of a multiple number of Parts.
Button
Accomp/SMF [ ] [ ] button
Pedal Level [ ] [ ] button
1. The volume levels of each part are adjusted using the corresponding [ ] [ ] buttons.
The volume can be set to any value from 0 to 12.
When the volume value shown in the display is 0, that part will produce no sound.
You can also press the [ ] button or [ ] button of the part whose volume you wish to adjust, so that the "Part Balance " screen is displayed for several
seconds, allowing you to check the volume balance.
You can adjust only the volume of the rhythm performance by pressing the Value [-] [+] buttons in the Part Balance screen.
Display Part
Ac Accomp/SMF
Ry
Rhythm
Pd Pedal
Lw Lower
MEMO
From the Part Balance screen, you can press the Menu [
you can adjust the volume balance for each of the arranger's accompaniment parts (p. 96).
Part
Automatic Accompaniment (except Bass)
Playback of performance songs from something other than the ATELIER performance songs
(for example: SMF music files)
Rhythm performance
Drums/SFX
Manual Percussion
Pedal voice
Bass note of Automatic Accompaniment
] button to access the Accomp Part Balance screen. In the Accomp Part Balance screen
Display Part
Or Upper Organ
Oc
Upper Orchestral
So Solo
35