Adding Resonance To The Sound (Sustain Effect); Changing The Sustain Length - Roland MUSIC ATELIER Series Owner's Manual

Adding Resonance to the Sound (Sustain Effect)

Sustain allows you to add a Sustain effect or decay to each voice after the keys are released.
The Sustain effect can be added simultaneously to the Upper (except the Solo Part), Lower, and Pedal voices.
* The Sustain effect will not be applied to the Solo part and vintage organ part voice.
1. Press the [Utility] button.
2. Press the Menu [ ] [
3. Press the [Utility] button.
4. Press the Menu [
] [
Part
5. Press the Value [-] [+] buttons to switch ON or OFF.
To return to the basic screen, press the [Display/Exit] button.
MEMO
By holding down the [Utility] button and using the Menu [
effect (p. 41) of the same part.

Changing the sustain length

The sustain length can be set independently for the each keyboard.
1. Press the [Utility] button.
2. Press the Menu [
] [
3. Press the [Utility] button.
4. Press the Menu [ ] [
5. Press the Menu [
] [
Part
6. Press the Value [-] [+] buttons to adjust the setting.
Settings
To return to the basic screen, press the [Display/Exit] button.
40
] buttons to select the "Sustain."
] buttons to select the desire part.
Upper, Lower, Pedal
] buttons to select the "Sustain."
] buttons to select "Length."
] buttons to select the part whose sustain length you wish to adjust.
Upper, Lower, Pedal
SHORT, MIDDLE, LONG
] [ ] buttons, you can jump to editing screens for the octave shift (p. 37) and reverb