Specify the key ranges in which the piano and bass will sound
In the Performance Layer screen, press [F3 (Key Range)]. The screen lets you specify the key range of
each part.
2
Use cursor (up/down) to select part 1 or 2.
1
Adjust the volume balance of the piano and bass
Adjust the volume balance so that the piano and bass are at the appropriate level respective to each other.
You can do more with Layers and Splits
Specify the key range in which the selected part will sound.
Move the cursor to "Lower" (or "Upper") and use VALUE dial to set the value,
then press "Set Lower" (or "Set Upper").
Part 1: piano volume
Part 2: bass volume
Use [CURSOR] (left/right) to select a part, use [CURSOR] (up/down)
to select "LEVEL,
You can adjust the effect settings appropriately for each part.
-> Owner's manual "Editing the Part Settings" (p. 104)
You can specify that the same effect settings as in Patch mode will be used.
-> Owner's manual "MFX1–3 Source (Multi-Effects 1 Source)" (p. 212)
Playing separate sounds with left and right hands (Splits)
Bass
and then use the VALUE dial to adjust the volume.
"
Piano
17