Section 3: Setup; Unpacking; Needed For Setup; Inventory - Grizzly T28959 Owner's Manual

Unpacking

This machine was carefully packaged for safe
transport. When unpacking, separate all enclosed
items from packaging materials and inspect them
for shipping damage. If items are damaged,
please call us immediately at (570) 546-9663.
IMPORTANT: Save all packaging materials until
you are completely satisfied with the machine and
have resolved any issues between Grizzly or the
shipping agent. You MUST have the original pack-
aging to file a freight claim. It is also extremely
helpful if you need to return your machine later.

Needed for Setup

The following items are needed, but not included,
for the setup/assembly of this machine.
Description
• Safety Glasses ........................................... 1
Mounting Hardware (Page 15) ... As Needed
•
This
serious
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
Model T28959 (Mfd. Since 2/19)

SECTION 3: SETUP

Qty
machine presents
injury hazards

Inventory

The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Box 1 (Figure 11)
A. Sharpener ................................................... 1
B. Swing Arm Handle ..................................... 1
C. Depth Stop Knob ........................................ 1
D. Chain Holder Assembly .............................. 1
A
Figure 11. T28959 Inventory.
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Qty
D
C
B
-13-