Table of Contents
Advertisement
Controls &
Components
To reduce your risk of
serious injury, read this
entire
using machine.
Refer to the following figures and descriptions to
become familiar with the basic controls and com-
ponents of this machine. Understanding these
items and how they work will help you understand
the rest of the manual and minimize your risk of
injury when operating this machine.
Chain Holder Assembly
C
B
A
E
Figure 1. Chain holder assembly.
A. Clamp Plates: Hold chain in place.
B. Guide Adjustment Controls: Controls how
much to move chain in advancement guide.
C. Advancement Guide: Helps guide chain to
next sharpening position.
D. Chain Holder Angle Knob: Loosen to
change angle of chain holder assembly.
Tighten to lock angle in position.
E. Chain Clamp Lever: Tightens clamp plates.
-4-
manual
BEFORE
D
Depth Stop Assembly
H
Figure 2. Depth stop assembly.
F.
Depth Stop Knob Bolt: Rotate clockwise to
reduce cutting depth. Rotate counterclock-
wise to increase cutting depth.
G. Depth Stop Jam Nut: Locks depth knob bolt
in place.
H. Depth Stop: Stops the sharpener at pre-
determined depth based on depth knob bolt
setting.
Model T28959 (Mfd. Since 2/19)
F
G
Advertisement
Table of Contents
