Air Controls; Waterfall Control; Fragrance Dispenser - Sundance Spas 880 Series Owner's Manual

10.9 Air Controls

Each jet system has its own air control. These controls allow
you to regulate the amount of air which is mixed with the water
entering through the jets. Clockwise rotation adds more air and
counterclockwise rotation reduces air flow. Note: To minimize heat loss,
close all air controls when spa is not in use. Certain jets may not draw air
while either jets pump is running in low speed; this is considered normal.

10.10 Waterfall Control

Turn waterfall control valve counterclockwise to increase
waterfall(s) output. Turn control valve clockwise to decrease
or turn off waterfall(s) output. Note: It takes 2 full revolutions
to change the waterfall from a full off to a full on flow rate.

10.11 Fragrance Dispenser

On the rim of your hot tub is a screw-off cap labeled "SunScents
Fragrance Dispenser" (pages 22-28). It is designed to contain packages of
a specially made fragrance available from your Sundance Spas dealer. The
fragrance is carried into the hot tub water by the air coming through the
injector system when the air blower is on.
CAUTION: To prevent personal injury, always turn off air
blower before removing or installing SunScents dis-
penser cap. Use only Sundance SunScents fragrances
in your new hot tub. Never remove the SunScents beads
from their plastic cage for any reason! Install bead
cage directly into SunScents dispenser. Never use this
dispenser for any other type of fragrance. Always make
certain that the dispenser cap is securely in place before
operating the hot tub's air blower.
Page 32
2x
Full
On
2x
Full
OFF
™