Keypad Operation - Kanomax TABmaster 6715 Instruction Manual

POWER
1. Start On
Press button【POWER】for 2 seconds for start On, displaying " KANOMAX" then enter into the
interface.
2. Power Off
Press【POWER】for 2 seconds, shut down and power off.

4.3. Keypad operation

Keypad panel includes control buttons, back-pressure switch and LCD adjusting keys.
1． Control buttons:
UP：Value increasing or Cursors upward moving.
SAVE：Save the current test results
SET：Store changes or enter into the selected option's next level interface
MENU：On the main screen holding this down for 2 seconds will enter into the main "MENU"
OK：In the "General Setting ", pressing for 2 seconds will save the date or time ;
While in the "Record Processing", pressing for 2 seconds will delete saved data.
START：Begin a measurement in main menu
STOP：Stop a measurement in main menu
BACK：Cancel or end an operation or return to the previous screen
EXIT：Return to the main menu
ESC：Stop printing when printing
DOWN:：Value decreasing or Cursors downward moving
2． Back pressure switch for on/off
Note ：
1) If you are not in the back pressure mode, shut down the back pressure plate and lock the
switch to avoid testing errors.
2) If the airflow is greater than 1500m
recommended according to testing procedures.
UP/SAVE
SET/MENU/OK
START/STOP/
BACK/EXIT/ESC
DOWN
3
/h (883CFM), testing in back-pressure Mode is
START/STOP
13
2014 / 03 / 20 13 : 10
ID:
01
Ready
3
m /h
Cycle:
99.0
Atmos: kPa
001
20.5
30.7
℃
%RH
Mode:
START SAVE MENU Single
testing
SAVE