Operating Instruction; Power Supply; Start On / Power Off - Kanomax TABmaster 6715 Instruction Manual

Hide thumbs Also See for TABmaster 6715:

Table of Contents

4. Operating Instruction

1．Power by AC adapter. AC adapter will be as the priority power supply when the AC adapter and batteries are

all available using.

The specification of the AC adapter is:

1）AC adapter for the master

2．Power by battery

 4 AA-size batteries can be used for a power supply.

 Press the compartment cover lock (refer to figure indicating ①/②), and then slide the cover off to open

the battery compartment。

 Put 4 AA-size batteries in and make certain the batteries are correctly oriented.

 New alkaline battery or rechargeable Ni-MH battery can be used. Never mix battery types, or battery

leakage or damage to the instrument may occur.

 Replace the compartment cover (refer to figure ③). The compartment cover will be automatically locked

②

 When power is supplied with batteries, the current charge value will be displayed on the upper of the LCD.

When the batteries run out of power, the instrument will turn off.

Note：

1） Do not test with low battery power.

2） Do not mixing use full power battery with low power ones for ensure testing well.

3） Change the batteries in time when power shows low for ensure testing well.

①

I/P:AC 110-240V 50/60HZ O/P:DC 5V/2A。

2）AC adapter for Capture Hood

③

Power off

Table of Contents