Table of Contents
Advertisement
z Hint
If you forget your password, clear the password and
registered a new password.
Press SET UP to turn on the Setup Display. Enter the six-
digit number 210499 using the number buttons. Select
OK
[
] and press ENTER. The registered password is
cleared.
[Parental Control]
Selects the limitation level.
1
Select [Parental Control] and press ,.
Parental Control
Set Password
Parental Control
Area Code
The display asks for the password.
2
Enter the four-digit password using the
number buttons and press ENTER.
3
Select the level and press ENTER.
The lower the level, the stricter the limitation.
If you select [No Limit], the Parental Control
function does not activate.
[Area Code]
Selects a code for a geographic area as the
playback limitation level. See "Area Code List"
(page 93).
1
Select [Area Code] and press ,.
2
Enter the four-digit password using the
number buttons and press ENTER.
3
Press M/m to enter the first character of the
area and press ,.
4
Press M/m to enter the second character and
press ENTER.
Notes
• When you play discs which do not have the Parental
Control function, playback cannot be limited on this
recorder.
• Depending on the disc, you may be asked to change the
Parental Control level while playing the disc. In this
case, enter your password, then change the level.
Recording Settings
The [Rec Setting] Setup allows you to adjust the
recording picture quality and size.
Select
use the display, see "Using the Setup Displays"
(page 69). The default settings are underlined.
No Limit
Level 8 (Adult)
Level 7
Level 6
Level 5
Level 4
Level 3
Level 2
Level 1 (Kids)
[Rec Mode Set]
Selects one of the following recording modes: HQ
(High Quality), SP (Standard Play), EP (Extended
Play), SLP (Super Long Play).
[Rec Aspect Ratio] (DVD-RW (VR mode) only)
Selects the picture size of the programme to be
recorded.
When recording on discs other than DVD-RWs
(VR mode), the screen size is fixed to 4:3.
[DV Audio Input]
Selects the stereo track when recording from a
digital video camera connected to the DV IN jack
on the front panel.
[Auto Chapter]
Automatically divides a recording (a title) into
chapters by inserting chapter markings at a
specified interval. The markings are inserted while
the recording is being made.
[Rec Setting] in the Setup Display. To
Rec Setting
Rec Mode Set
Rec Aspect Ratio
DV Audio Input
Auto Chapter
[ 4:3 ]
Sets the picture size to 4:3.
[ 16:9 ]
Sets the picture size to 16:9 (wide
mode).
[ Stereo 1 ]
Records original sound at the time
of shooting. Normally select this
when dubbing a DV/Digital8
format tape.
[ Stereo 2 ]
Records only additional sound
over-dubbed after shooting.
[ Off ]
No chapter mark is inserted.
HQ
SP
EP
SLP
,continued
77
Hide quick links:
Advertisement
Table of Contents
