Connecting To The Line 2 In Or Line 4 In Jacks - Sony RDR-GX210 Operating Instructions Manual

Connecting to the LINE 2 IN or LINE 4 IN jacks

Connect a VCR or similar recording device to the LINE 2 IN or LINE 4 IN jacks of this recorder. If you
are connecting to the LINE 2 IN jacks and the equipment has an S-video jack, you can use an S-video
cord instead of a video cord.
z Hint
When the connected equipment outputs only monaural sound, use audio cords that distribute monaural sounds to left/
right channels (not supplied).
Notes
• Do not connect the yellow LINE IN (VIDEO) jack when using an S-video cord.
• Do not connect the output jack of this recorder to another equipment's input jack with the other equipment's output
jack connected to the input jack of this recorder. Noise (feedback) may result.
• Do not connect more than one type of video cord between the recorder and your TV at the same time.
24
VCR, etc.
VIDEO
Video cord
(not supplied)
to LINE 2 IN
AERIAL LINE 3 / DECODER DIGITAL OUT
COAXIAL
IN
PCM/DTS/
MPEG/
DOLBY DIGITAL
VIDEO OUT LINE 2 OUT
LINE 1 - TV SELECT
RGB
OUT
COMPO-
NENT S VIDEO
: Signal flow
OUTPUT
AUDIO
S VIDEO
L R
Audio cord
(not
supplied)
DVD recorder (front)
COMPONENT
LINE 2 OUT LINE 4 IN
VIDEO OUT
L L
P B /C B AUDIO AUDIO
DIGITAL OUT
R R
P R /C R
PCM/DTS/MPEG/
DOLBY DIGITAL
OPTICAL
Y
VIDEO VIDEO
to LINE 4 IN
S-video cord
(not supplied)
(rear)
VCR, etc.