Connecting A Vcr Or Similar Device - Sony RDR-GX210 Operating Instructions Manual

Connecting a VCR or Similar Device

After disconnecting the recorder's mains lead from the mains, connect a VCR or similar recording device
to the LINE IN jacks of this recorder.
Use the DV IN jack on the front panel if the equipment has a DV output jack (i.LINK jack) (page 66).
See also the operating instructions supplied with the connected equipment.
To record on this recorder, see "Recording From Connected Equipment" (page 45).
Connecting to the LINE 3 jack
Connect a VCR or similar recording device to the LINE 3/DECODER jack of this recorder.
to SCART input
Notes
• Pictures containing copy protection signals that prohibit any copying cannot be recorded.
• If you pass the recorder signals via the VCR, you may not receive a clear image on your TV screen.
DVD recorder
Be sure to connect your VCR to the DVD recorder and your TV in the order shown below. To watch video tapes,
watch the tapes through a second line input on your TV.
VCR DVD recorder
• When you record to a VCR from this DVD recorder, do not switch the input source to TV by pressing the TV/DVD
button on the remote.
• If you disconnect the recorder's mains lead, you will not be able to view the signals from the connected VCR.
TV
SCART cord
(not supplied)
to i
LINE1-TV
AERIAL LINE 3 / DECODER DIGITAL OUT
COAXIAL
IN
PCM/DTS/
MPEG/
DOLBY DIGITAL
VIDEO OUT
LINE 2 OUT
SELECT
LINE 1 - TV
RGB
OUT
COMPO-
NENT
S VIDEO
VCR TV
Line input 1
TV
Line input 2
to i LINE
3/DECODER
COMPONENT
LINE 2 OUT LINE 4 IN
VIDEO OUT
L L
P /C
B B AUDIO AUDIO
DIGITAL OUT
R R
P /C
R R
PCM/DTS/MPEG/
DOLBY DIGITAL
OPTICAL
Y
VIDEO VIDEO
VCR
DVD recorder
,continued 23