Labelling And Protecting A Disc - Sony RDR-GX210 Operating Instructions Manual

Labelling and Protecting a
Disc
SET UP
Labelling a disc
+ - RW
RW
VR
A disc is automatically labelled as its disc type.
You can change the disc name (up to 21 characters).
1
Insert a disc.
2
Press SET UP to turn on the Setup Display.
3
Select [Disc Info] and press ,.
4
Select [Disc Name] and press ,.
Disc Info
Format DVD
Finalize
Disc Name
Protect
5
While [Edit] is selected, press ENTER.
The display for entering characters appears.
To enter characters, see page 32.
34
1 2 3
4 5 6
7 8 9
0
</M/m/,,
ENTER
- RW + -
R R
Video
Edit
Note
Label the disc before you finalize it. Once a disc is
finalized, you cannot change the disc name.
Protecting a Disc
+
+ RW - RW R
VR
You can protect all titles on the disc to prevent
accidental recording, editing, or erasing.
1
Insert a disc.
2
Press SET UP to turn on the Setup Display.
3
Select [Disc Info] and press ,.
4
Select [Protect] and press ,.
Disc Info
Format DVD
Finalize
Disc Name
Protect
5
Select [On] and press ENTER.
To cancel the protection
Repeat the steps above, and select [Off] and press
ENTER in step 5.
z Hint
For DVD+RWs and DVD+Rs, you can set protection for
individual titles (page 62).
Off
On