Recording Settings (Recording); Disc Settings (Dvd); Remote Control Settings/Factory Settings (Others) - Sony RDR-GX330 Service Manual

Timer Settings
Recording Settings
Rec Mode Adjust
(Recording)
On
The "Recording" setup allows you to adjust
recording settings.
Off
1
Press SYSTEM MENU while the
Auto Chapter
recorder is in stop mode.
Selects whether to automatically divide a
2
Select "SETUP," and press ENTER. recording (a title) into chapters during
recording or dubbing.
3
Select "Recording," and press
ENTER. On
The "Recording" setup appears with the
following options. The default settings
are underlined.
Off
b
Notes
• The actual chapter mark interval may vary
depending on the amount of information
contained in the video to be recorded.
• Chapter marks are automatically inserted where
the recordings start on the tape when "Auto
Chapter" is set to "On" during DV dubbing to a
DVD-RW/DVD-R (VR mode).
DVD Rec. Settings
Bilingual Recording (for all recordable
discs except DVD-RWs/DVD-Rs in VR mode)
Selects the sound to be recorded on the
recordable disc. This setting is not necessary
when recording on DVD-RWs/DVD-Rs (VR
mode) that record both the main and sub
sounds.
Main Records the main sound for
the bilingual programme.
Sub Records the sub sound for the
bilingual programme.
5 z Hint
Select "Level," and press ENTER.
If you select "Others" in "DVD Menu," "Subtitle,"
The selection items for "Level" are
or "Audio," select and enter a language code from
displayed.
"Language Code List" on page 94 using the number
buttons.
b
Note
If you select a language in "DVD Menu,"
"Subtitle," or "Audio" that is not recorded on the
DVD VIDEO, one of the recorded languages will
be automatically selected.
The lower the value, the stricter the Format DVD-RW (DVD-RW only)
limitation.
The recorder automatically starts formatting
Discs rated higher than the selected level
in VR mode or Video mode, whichever is
will be restricted.
selected below, when a new, unformatted
6 DVD-RW is inserted.
Select the level, and press ENTER.
The Parental Control setting is complete.
VR
To cancel the Parental Control setting for
the disc, set "Level" to "Off" in step 6.
Video
To change the password, select
"Password" in step 3, and press ENTER.
When the display for registering a
One Touch Dubbing
password appears, enter a new four-digit
Displays the following options for the One
password using the number buttons, then
Touch Dub function.
select "OK" and press ENTER.
Finalise Disc (for all recordable discs
b
except DVD-RW in VR mode)
Notes
• If you forget your password, you will have to Selects whether or not to finalise the disc
reset it by selecting "Parental Control" of
automatically following One Touch Dubbing
"Factory Setup" in the "Others" setup (page 80).
(page 65).
• When you play discs which do not have the
Parental Control function, playback cannot be
Auto
limited on this recorder.
• Depending on the disc, you may be asked to
change the Parental Control level while playing
the disc. In this case, enter your password, then
Manual
change the level.
Language (DVD VIDEO only)
DVD Menu
Switches the language for the DVD menu.
Audio
Switches the language of the sound track.
When you select "Original," the language
given priority in the disc is selected.
Subtitle
Switches the language of the subtitles
recorded on the disc.
When you select "Audio Follow," the subtitle
language changes according to the language
you selected for the sound track.
Automatically adjusts the
recording mode to enable the
entire programme to be
recorded (page 38).
Turns off the function.
Inserts chapter marks at
approximately 6 minute
intervals.
No chapter mark is inserted.
77
Automatically formats the
disc in VR mode.
Automatically formats the
disc in Video mode.
Automatically finalises the
disc following One Touch
Dubbing.
Allows you to finalise the
disc manually.
79
1-19

Disc Settings (DVD)

The "DVD" setup allows you to adjust
parental control, language and other DVD
related settings.
1
Press SYSTEM MENU while the
recorder is in stop mode.
2
Select "SETUP," and press ENTER.
3
Select "DVD," and press ENTER.
The "DVD" setup appears with the
following options. The default settings
are underlined.
Parental Control (DVD VIDEO only)
Playback of some DVD VIDEOs can be
limited according to a predetermined level,
such as the age of the users. Scenes may be
blocked or replaced with different scenes.
1
Select "Parental Control" in "DVD," and
press ENTER.
• If you have not entered a password, the
display for registering a new password
appears.
78
Remote Control Settings/
Factory Settings (Others)
The "Others" setup allows you to set up other
operational settings.
1
Press SYSTEM MENU while the
recorder is in stop mode.
2
Select "SETUP," and press ENTER.
3
Select "Others," and press ENTER.
The "Others" setup appears with the
following options. The default settings
are underlined.
Dimmer
Adjusts the lighting of the front panel display.
Normal Bright lighting.
Save Low lighting. Turns off the
Power lighting when the power is
off.
Command Mode
Changes the Command Mode of the recorder
if other DVD equipment is assigned the same
Command Mode. For details, see "If you
have a Sony DVD player or more than one
Sony DVD recorder" on page 17.
Registration Code
Displays the registration code of DivX video
files for this recorder.
For more information, go to http://
www.divx.com/vod on the Internet.
80
RDR-GX220/GX330
• When you have already registered a
password, the display for entering the
password appears.
2
Enter your four-digit password using the
number buttons, then select "OK" and
press ENTER.
3
Select "Standard," and press ENTER.
The selection items for "Standard" are
displayed.
4
Select a geographic area as the playback
limitation level, and press ENTER.
The area is selected.
• When you select "Others," press the
number buttons to select and enter an
area code in the table (page 94). Then
select "OK" and press ENTER.
Factory Setup
Allows you to select the setup settings by
group, and return them to their default
settings. Note that all of your previous
settings will be lost.
1
Select "Factory Setup" in "Others," and
press , or ENTER.
The display for selecting a group of
settings appears.
2
Select the group of settings you want to
return to default from "Basic," "Video,"
"Audio," "Recording," "DVD,"
"Others," "Parental Control," and "All,"
and press , or ENTER.
3
Select "Start," and press ENTER.
The selected settings return to their
default settings.
4
Press ENTER when "Finish" appears.